版本 Diff 差异对比

条目:伟大工程修改 · 对比历史版本与当前版本间的真实 Wikitext 差异

+94 行新增-20 行移除
历史基准版本Rev #46317
/* Localisation */
洛子谦2018-09-12 09:15:31
当前最新版本Rev #103650
当前线上生效正文
Modder of Elysia2024-07-27 14:10:47
Wikitext 语法逐行变动
当前版本新增历史版本移除
- {{version|长期有效}}{{需要翻译|en=Great project modding}}
+ {{version|长期有效}}
奇迹是一种特殊的决议,比较常见的是修建运河,通过变更目标环境替换成可通行的河流。
创造一个奇迹需要修改多个不同的文件才能达成。注意,本文将以运河为例描述如何创造一个“奇迹”。
== 奇迹工程 ==
奇迹可以在{{path|common/great_projects/*.txt}}中找到。 格式如下:
<pre>
<project> = {
- ambient_object = <object> # “ambient_object”可以在map文件夹中的“ambient_object.txt”中找到
- province = <id> # 奇迹将要替换的省份
- is_canal = yes # 是否为运河
- time = 120 # 奇迹建造事件(单位:月)
-
- # 以下修正仅适用于上方填写的省份
- modifier = {
- <province modifiers>
+ # Province the project starts in
+ start = <province id>
+
+ # Date built in real life (If you start the game at a date later than this, then the project will show up)
+ date = year.month.date
+
+ # How much it costs to build
+ build_cost = <ducats>
+
+ # If the project can be moved
+ can_be_moved = yes/no
+
+ # Starting tier of the project
+ starting_tier = <tier>
+
+ # Project type
+ type = canal/monument
+
+ # Conditions to build the project
+ build_trigger = {
+ <conditions>
}
+
+ # What happens when the project is built
+ on_built = {
+ <do stuff> # For example; add_prestige = 25
+ # For canal, do add_canal = <canal_name>
+ }
+
+ # What happens when the project is destroyed
+ on_destroyed = {
+ <do stuff> # For example; add_prestige = -25
+ # For canal, do remove_canal = <canal_name>
+ }
+
+ # Conditions to use project
+ can_use_modifiers_trigger = {
+ <conditions>
+ }
+
+ # Conditions to upgrade project
+ can_upgrade_trigger = {
+ <conditions>
+ }
+
+ # Conditions for if the project will be destroyed when conquered
+ keep_trigger = {
+ <conditions>
+ }
+
+ # Tiers
+ tier_<tier> = {
+ # Time it takes to upgrade the project
+ upgrade_time = {
+ months = <months>
+ }
+
+ # Cost to upgrade the project
+ cost_to_upgrade = {
+ factor = <ducats>
+ }
+
+ # What modifiers are given to the province the project is located in
+ province_modifiers = {
+ <modifiers>
+ }
+
+ # What modifiers are given to the area of the province the project is located in
+ area_modifier = {
+ <modifiers>
+ }
+
+ # What modifiers are given to the nation that owns the monument
+ country_modifiers = {
+ <modifiers>
+ }
+
+ # What happens when the upgrade is complete
+ on_upgraded = {
+ <do stuff> #For example; add_prestige = 25
+ }
+ }
}
</pre>
+ '''注意:''' 原版游戏中有4个等级,包括被摧毁/未建成等级,如下所示:tier_0, tier_1, tier_2, tier_3
+ == Great Project Image ==
+
+ You will need to create an image in {{path|gfx/interface/great_projects/great_project_<project_name>.dds}}, this image should be 300x150 and saved with file type DirectDraw Surface (.dds).
+ You will also need to add this image in {{path|interface/<filename>.gfx}} as following:
+
+ <pre>
+ spriteTypes = { # If editing an existing .gfx file then this line will likely already be there, so you might not need to write this. However, make sure the following are inside this.
+ spriteType = {
+ name = "GFX_great_project_<project_name>"
+ texturefile = "gfx//interface//great_projects//great_project_<project_name>.dds"
+ }
+ }
+ </pre>
+
+
== 连接海域 ==
运河类奇迹需要在 '''adjacencies.csv''' 中定义一个特殊的链接关系。
<pre>
<id>;<id>;canal;<id>;-1;-1;-1;-1;comment
</pre>
前两个 '''<id>''' 为运河将链接的海域省份ID;第三个 '''<id>''' 是奇迹所在省份ID(注意:必须与奇迹文件中定义的省份相符)
== 地图 ==
- [[File:Dragon canal river.bmp.png|thumb|An example tile: dragon_canal_river.bmp]]
+ [[File:Dragon canal river.bmp.png|thumb|例子示意图: dragon_canal_river.bmp]]
当运河工程完成后,运河所在省份会形成一条新的河流。正是通过这条特殊的瓦片河流图块链接到你的运河。
创建瓦片河流,你必须将图片裁剪成128(即128*128,256*256等)分辨率。从 ''rivers.bmp'' 中拷贝所需要的截面,以达成图层颜色统一的目标。
瓦片中新增需要的河流(运河), 规则与一般新建河流规则相同。
将文件名保存为 '''<project>_river.bmp''' 格式, 当中的 <project> 即为奇迹名称。
'''重点:''' 注意,在你实际操作之前,请务必留意原图 ''rivers.bmp'' 中瓦片图块的左上与左下的坐标。
在 '''default.map''' 中, 你需要自定义一条新的运河:
<pre>
canal_definition = {
- name = \"<project_name>\" # 奇迹名称
- x = <x> # X轴坐标对应瓦片图块的左上角坐标
- y = <y> # The map height minus the y-coordinate of the bottom left corner of your tile.
+ name = "<project_name>" # 奇迹名称
+ x = <x> # X轴坐标对应瓦片图块的左上角坐标(其实也是左下角的x坐标)
+ y = <y> # 地图高度 减去 你的瓦片的左下角的y-坐标
}
</pre>
- The y-coordinate here is not intuitive, the y-coordinate you'll get in a program like Photoshop needs to be subtracted from the map height to get the correct value for the definition.
+ 这里的y-坐标不是直观可见的,你在像Photoshop这样的程序中得到的y坐标,需要从地图高度(原版地图是2048像素)中减去它才能获得定义的正确值。(这个操作是把Photoshop的第四象限坐标,转换成普通的第一象限坐标。)
- For example, if your tile's bottom-left y coordinate was 1407, you'd do 2048 - 1407 to get 641, which is the value you should put in the definition.
+ 例如,如果你的瓦片的左下角y坐标是 1407,你应该用 2048 - 1407 得到 641,那才是你需要写进定义的值。
== 奇迹决议 ==
为了使玩家或者AI可以建造奇迹,我们一般需要设置两个决议:一个用于启动建造;一个用于取消建造。<br>
决议模板:
<pre>
country_decisions = {
construct_<project> = {
major = yes
potential = {
is_random_new_world = no
OR = {
ai = no
AND = {
treasury = 60000
owns_or_vassal_of = <province id>
}
}
has_discovered = <province id>
<province id> = {
range = ROOT
NOT = { has_great_project = <project> }
NOT = { has_construction = canal }
}
}
allow = {
owns_or_vassal_of = <province id>
is_subject = no
treasury = 30000
}
effect = {
add_treasury = -30000
<province id> = {
- add_great_project = <project>
+ add_great_project = {type =<project> instant = yes/no}
}
}
ai_will_do = {
factor = 1
}
}
cancel_<project> = {
major = yes
potential = {
ai = no
owns_or_vassal_of = <province id>
is_subject = no
<province id> = {
has_construction = canal
}
}
allow = {
<province id> = {
has_construction = canal
}
}
effect = {
<province id> = {
cancel_construction = yes
}
}
ai_will_do = {
factor = 0
}
}
}
</pre>
== 本地化 ==
当然,奇迹建造若需要正常显示也少不了在本地化中添加相应条目:
<pre>
- <project>_title: \"Name\"
- <project>: \"Name\"
- great_project_<project>: \"Name\"
+ <project>_title: "Name"
+ <project>: "Name"
+ great_project_<project>: "Name"
</pre>
+
+ == 参考资料 ==
+ <references/>
+ 三条运河的关键字:
+ # <code>kiel_canal</code>
+ # <code>suez_canal</code>
+ # <code>panama_canal</code>
+
{{Modding navbox}}
- [[Category:改派教程]]
+ [[Category:模组制作]]
[[en:Great project modding]]